Plans to build the 27' Chubasco Mullet Skiff

The Chubasco is a 27 foot version of the Mullet Skiff offering more in the way of accommodations for the cruiser. A galley and head could be easily worked in below. Low to moderate gas or diesel inboard power is all you need. The lightweight 4 cylinder, 100 hp Yanmar diesel would make a perfect engine and drive this seakindly hull about 15 knots or so without burning much fuel.

Chubasco Mullet Skiff Boat Plans

Photos of the Chubasco Mullet Skiff

Chubasco Mullet Skiff

Chubasco Mullet Skiff

Free Study Plans for the Chubasco Mullet Skiff

Our study plans are two of the actual construction drawings. They're not enough information for you to build the boat, but they do give you the overall boat size, shape and construction methods. This is a pdf file readable with the free Adobe Acrobat pdf file reader.

Download Free Study Plans for the Chubasco Mullet Skiff

Purchase Construction Plans for the Chubasco Mullet Skiff

IMPORTANT - Read Carefully Before Ordering

If you are purchasing plans that you will be downloading in electronic format, you will NOT be emailed the plans. You must complete the download process yourself. After completing the purchase and having your payment accepted, use the Return to Spira International link to take you to a secure page on the Spira International site where you may download the plans and instructions. DO NOT USE THE [BACK] BUTTON! We will be notified of your purchase, but are not informed if you completed the download of your plans or not. If, for some reason, you cannot download the plans immediately after completing the transaction, e-mail us and we'll make sure you receive the approprite link to download your plans.

If you are purchasing printed plans that you expect shipped to you, use the appropriate button below. The plans will be sent via USPS Priority mail. Allow 1-2 weeks if in the US, and up to 4 weeks or more outside the US.

Want to Know about the Plans and the Difference Between E-Plans and Printed Plans?

Check out this blog post: What Comes With Your Plans and What's the Difference Between E-Plans and Printed Plans?

Electronic Construction Plans for 27' Chubasco

Imperial (feet and inches) only
Downloadable PDF Plans

US$ 129.99

No Shipping - You Download Instantly

Printed Construction Plans for 27' Chubasco

Imperial (feet and inches) only
Paper Plans Mailed to You

US$ 144.99

+ Shipping ($6 USA, $23 International)

Mail, Phone or FAX Ordering Electronic or Printed Plans

If you wish to receive printed plans, or wish to pay by check, money order or credit card by mail, phone or FAX, just download the pdf order form and price list by clicking on the image below.

Download Boat Plans Order Form and Price List

About Mullet Skiffs

Plans to build a mullet skiff boat

Mullet skiffs were originally developed for the Florida Mullet fishery in the early 1900s to be able to carry a load while operating in shoal water. They were never modernized to adapt to new materials until now. These hulls feature a dory style hull, with a vee entry. This makes it stable, capable in rough seas, easily driven with minimal power - just about everything a real sea dog likes in a boat. They'll get up and move, too, without too much power, though not a modern high speed planing hull, as they were developed for the low power, heavy and unreliable gas engines of a century ago

My take on these sturdy cruising hulls are constructed of standard milled construction lumber, available at any lumber yard, covered with ply, then fiberglassed over with epoxy resin to make a very tough, commercial grade hull, ready for just about anything. While not as easy to build as a dory, they're well within the capabilities of the amateur wood worker, even a first time boat builder.

The photo above is two Florida Mullet Fisherman coming in with their net on the transom of their Mullet Skiff taken in the 1930s, courtest of the Florida State Photographic Collection and the State of Florida.



Follow Spira Boats on:

Contact Spira Boats via: